Monthly Archives: October 2012

Your Questions About For Those About To Rock

October 31, 2012
By

Ruth asks…

Where can I download “for those about to rock” and “hells bells” to my ipod touch?

Acdc isn’t on iTunes so idk where to download it. Possibly free? And not limewire or other cable required / filesharing websight

admin answers:

Rip it off youtube

http://www.listentoyoutube.com/

Michael asks…

For those about to rock we salute you?

We’re just a battery for hire with a guitar fire
Ready and aimed at you
Pick up your balls and load up your cannon
For a twenty-one gun salute

So who’s about to rock?

admin answers:

Me and ACDC are!

~chocolate lover

Helen asks…

Why does AC/DC only salute “those about to rock”?

What about the people that are already rocking? What about people that have previously rocked and have finished for the day? Don’t they deserve a salute? COME ON!

admin answers:

People who are already rocking already got saluted, so they’re good. It’s just the people who are about to rock but haven’t quite done it yet, they still need to be saluted. Personally though, I’d prefer to wait until they actually do start rocking before they get saluted. I mean, what if they change their mind at the last second and decide not to rock at all?

Powered by Yahoo! Answers

Your Questions About Google

October 30, 2012
By

Linda asks…

How can Google get profits with providing a free researching system for us?

I was just wondering how can Google get profits by providing us a free researching system. We pay nothing and the google allows us to search free. How does it work??
Thank you

admin answers:

Google gets its revenue from the advertising market – providing ads above and beside searches, and using tracking cookies to know what you search for and the sites you go on to serve you targeted ads that you are more likely to click on and buy through.

Jenny asks…

How can I stop Google from showing a location under the search bar?

Google has started displaying a location under the search bar to the left. There’s an option to change the location, or to let Google auto-detect, but I don’t want a location displayed at all. How do I stop Google from showing what it thinks is my location under the search bar on the left?

admin answers:

You need to add something.

USE this:

http://www.google.com/ncr

It won’t redirect and it will go to www.google.com
You can save this URL on your default homepage in your browser.

Mandy asks…

How long does it take for google to recognize backlinks?

Hi,

I have recently launched a new website. I just want to know how long does it take for Google to recognize backlinks to my site. I am currently generating backlinks by posting on different forums, blog commenting and directory submission. It has been a week now but still there are 0 backlinks to my site according to Google.

Yahoo is relatively quicker than Google in recognizing backlinks. Does anyone have any idea how long does it take for Google to recognize backlinks to my website?

admin answers:

If your backlinks come from good quality (good according to Google) sites then only Google lists them and better quality links take very less time to appear I have seen Google pick up links for my site in less the 4 days. Normally, it will take about 1-2 weeks to get the effect of your backlinks. However, if you can get backlinks from high traffic pages or sites, Google normally used to visit those sites very frequently.

Google doesn’t list every backlinks to your website, but yahoo does. That’s why you think yahoo is quicker. But I believe that Google is faster than Yahoo in indexing websites, so happened to me. If you links are listed in Yahoo, sure Google knows about them, but it may not list them. Use Social Bookmarking which all are high quality site according to Google also when you bookmark your website with Social Bookmarking site you will find most of them are authority site also so you will get very quick back link.

Powered by Yahoo! Answers

Your Questions About Carnitine

October 30, 2012
By

George asks…

Does anyone know how Carnitine Acyltransferases work and where they are in the cell?

admin answers:

Fatty acids must be activated before they can be carried into the mitochondria, where fatty acid oxidation occurs. This process occurs in two steps. Once activated, the acyl CoA is transported into the mitochondrial matrix. This occurs via a series of similar steps:

Acyl CoA is conjugated to carnitine by carnitine acyltransferase (palmitoyltransferase) I located on the outer mitochondrial membrane
Acyl carnitine is shuttled inside by a translocase
Acyl carnitine is converted to acyl CoA by carnitine acyltransferase (palmitoyltransferase) II located on the inner mitochondrial membrane
It is important to note that carnitine acyltransferase I undergoes allosteric inhibition as a result of malonyl CoA, an intermediate in fatty acid biosynthesis, in order to prevent futile cycling between beta-oxidation and fatty acid synthesis.

Donald asks…

How does L-Carnitine work in my body?

I’m 5′ 4” and i weigh 110. i want to lose some fat because it’s really bothering me. I’ve been taking 1g of L-Carnitine everyday and i was wondering if it would do anything at all?
I don’t have a regular excersise routine yet but i will be running cross country every morning starting next week.
i think i eat too much food as well..
i need help curbing my appetite ):

Help me pleaseee

admin answers:

L-Carnitine is one of the amino acids, and the body uses it to turn fat into energy. This is also come as pills too. If you want to take it, I suggest you take it before you go running.

William asks…

What is the difference between L-Carnitine and L-Glutamine?, and can u take them together?

Im feeling really tired from my new workout program and want both a energy supplement and a fat loss supplement.

admin answers:

It’s all simple sugars by the time your gut digests them. You might as well eat a cake. The claims of these ‘supplement’ makers are farcical.

Powered by Yahoo! Answers

Your Questions About If You Choose To Accept This Mission

October 29, 2012
By

Ken asks…

It’s my Birthday today!?

Just wondered if anyone shared this special day with me!! And your mission, should you choose to accept it is to make me laugh on my Birthday…..GO!!

admin answers:

Signs That You are Too Drunk:-

Your job is interfering with your drinking.
Your doctor finds traces of blood in your alchohol stream.
The back of your head keeps getting hit by the toilet seat.
You sincerely believe alchohol is the elusive 5th food group.
24 hours in a day, 24 beers in a case – coincidence? I think not!
You can focus better with one eye closed.
The parking lot seems to have moved while you were in the bar.
You think the Four Basic Food Groups are Caffeine, Nicotine, Alchohol, and [Women or Men].

HAPPY BIRTHDAY

Nancy asks…

Were building a pit in the shape of an octagon, the diameter is 36″. What would the 8 sides measure?

I was given this question for extra credit in a trig class. heres what we were given. “We are trying to build a pit for the college, I need to know if it was a octagon and the diameter is 36″, What would each of the 8 side peices be?”

The mission, if you choose to accept it, is to figure out the length of each side (interior dimension) to the nearest 1/26 of an inch. I also want to know the angles that would have to be cut on each piece, assuming you are constructing it of “2-by” lumber. Thus, you will also need to provide the total length of each side piece, before cutting.

I found it challenging and figured Id share t with someone else let me know what u got.

admin answers:

I just looked the number up in my Engineering Mathematics Handbook:

R/a for an octagon is 1.306563

If R is 18″, then a is 13.7769″

If 36″ is the outside diameter of the pit, then mark 13.75″ on the lumber and bevel the cuts inside at 11.25 degrees (this is an error of 0.02660″, which is less than 1/26th of an inch). If 36″ is the inside diameter, then mark 13.75″ and bevel the 11.25 degree cuts so the lumber is larger than 13.75″ on one side.

Cut 8 identical pieces and nail ‘em together.

.

Carol asks…

Replacing T-stat on HVAC system, old to new and extra wires… hmmmm? oh .. no heat!?

Here is your mission should you choose to accept it… HELP!!!!

It’s not horribly cold out, have back up heaters but trying to change T-stat. I have wired Hydronic boilers so know the new stuff but this retro is kicking my butt.

Older home, 1964 with Electric Furnace and Heat pump for heat and A.C. Old T-stat has Mercury bulbs. Furnis replace about 15 years ago.. appears some wires left dangling.. you will read below.

New Honeywell RTH7400 Series from The Home depot for Furnace/Heatpump, A.C. Jump on me later for that… buy hey.. I’m a homeowner… where else can I go…
Facing new base plate to land wires there is a power strip on the left and one on the right. there are 8-lugs on the left and 3-on the left.

Issues and why tackle now: Last winter the low voltage 5 amp fuse blew, replaced. last week, again 5 amp low volt blew, changed and fired up for a day or two… and blew again. Looked for a grounded wire on low voltage side.. none found… posted on here to replace T-stat so here I am. What complicates is fuse blows when energized so system is basicly down so till I get some wires pluged in to base plate and energize which should not blow a fuse as the T-stat won’t yet be isnerted into base plate…. possibly a ground wire out at Heat pump but I checked… but first thing first.. get these wires landed…

As found, wires coming off top strip on old mercury T-stat:
R=Red, 1 or T? =Brown, G=Green, O=Orange, W=White Y=yellow, X2=Dark Blue, B=Dark Blue for a total of 8 wires.

Wire coming off of control board on Furnise where 5 amp fuse blows that feeds the Old T-stat:
D=(Blank), R=Red, W=White, Y1=(Blank), Y2=Yellow, G=Green, O=Orange, C=dark Blue or Blk? (the dark Blue splits at furniss, one to heat pump-one to T-stat)

Now… issues….
At the furniss the B=Brown wire is cut and not tied to anything, also; one of the Dark blues (2 too old T-stat) is also cut in furniss and is connected but dead at the T-stat.

so.. lets eliminate those two dead wires as for what ever reason (they replaced furniss 15 years ago prior to us moving in… so newer furniss but original T-stat.)

So… the active wires at the wall to install the new T-stat would be:
R=Red, G=Green, O=Orange, W=White Y=yellow, X2=Dark Blue/BLK, (One Brown and Dark Blue/blk wires apear to go to nothing?) This means I have 6 wires to plug in.

The new T-stat has two sets of marking.. those on the innerside of the terminal strip are for “conventional system” and the markings on the outer side of the terminal strip are for “wiring-heat pump” systems… ie… furniss with heat pump on it???
Quesion 1. ) I am susupecting I should use the color coding for the
“outside as there is a heat pump?
Now the new T-stat, the color codes read for heat pump install reads on the left side:
C=Common? color?, G=green, y=yellow, O/B=Orange/brown?, RC=?, R=Red
on the right side it reads: Aux=? , E=? , L=?

Markings on the inside of the power strip are:
C=common, G=Green, Y=yellow, RC=? (jumper to R) R=Red, W2, Y2
Markings on the Inside of the power strip on right are: W2=?, Y2= ?,

so more issues… if I use the color scheme on the inside I have a place to land the white.. if I use the outside there is no white lug…. and on the outside no orange…. ???????

o.k…. what do I need to do to figure this out… remember… furnis is dead… but can energize but if ground is at heat pump it will blow 5 amp fuse.. so need to figure this out with info given…

lets Get er done!
1.) correction: should read: 8-lugs on left, 3-lugs on right side
2.) also on the next page it reads: “alternate wiring (for heat pumps only) … not sure if that means my system… but want both the electric heat and the heat pump so believe that this should not apply to my install, it also addresses V or VR wires.. have no idea on that and believe this is not relevant to my install.
3. The instruction manual calls out differing type of systems, which do I have:

1.) a Single state heat and cool.
2.) Multistage heat and cool
3.) Heat pump with out backup heat
4.) Heat pump with backup heat
5.) Heat only
6.) cool only
Yes, I did call a HVAC guy I know… always have a back up plan man…. just looking for input.
Wires sticking out of wall, new fuse, energized and fuse didn’t blow.. not sure same results one able to start up… but here I sit…

cricket,cricket….cricket,cricket…..
4.) I did have new T-stat wired correctly… the guy came out and said it looked good so we inserted new t-stat, set codes.. would run on Emergency heat but not with heat pump so disconnected that from low voltage and running on e-heat. He suspects transformer or heat pump circuit board, we did a continuety check on all the wires… so on Monday he will come back out and figure the rest out…..
so.. lets review… the Honeywell data is limited… it can’t have all the answers but the stated install time of 15 minutes as noted on the front cover is B.S…. even on a perfect install. The ability to desipher this is beyond the average HVAC people that trvel this site nor are they up to the challenge short of …. call in an expert…. well.. Duh….

As I had figured there were multiple issues, but eliminating a possibility and improving the system makes more sense then sitting there and pumping fuses into a slot that likes to eat and spit them out…

so.. I guess you lose…. you

admin answers:

Your original problem was not caused by a faulty stat, now you have two different problems. Call a professional.

Powered by Yahoo! Answers

Your Questions About Google Voice

October 28, 2012
By

Mandy asks…

How to uninstall Google Voice and Video on Mac?

It tells me to go to my library then application support, then Google, voice and video uninstall er.
My mac doesn’t have a uninstall er, when I googled this someone else had the same problem and never got a answer. When i video chat with my friends on tiny chat , it doesn’t let me, it “cant ” find my camera.

Please help.

admin answers:

Go to Finder:Library:Application Support: Google: and use the uninstaller for the plug-in you must close all browsers first than go to tiny chat and it should work if you use Google than guess you have to install and uninstall when not in use but I am able to tiny chat now

William asks…

How do you listen to someones conversations on google voice?

My brother was looking through previous conversations I’ve had with people on my cellphone. I want to know how he did this being how apparently the application he used was google voice.

admin answers:

If you make and receive call using google voice it keep a history of your calls. If you have these people in your contacts the name will show too. Your cell phone bill online could show the same information. Google could record incoming conversation by pressing the number 4 on incoming calls it will tell the people they are being recorded so you must be mistaken that he is listening to call on you cellphone with google voice. Google voice does not record call without informing the parties on the line.

Lizzie asks…

How to completely delete a google voice account?

I uninstalled the app on my phone and I put it on do not disturb and tried to delete my cell as the forwarding number, how do I completely delete google voice from my gmail account? I have been getting random calls and its annoying and I just want it gone for good. Please help!

admin answers:

Try to use the professional tool to delete google voice account?

Powered by Yahoo! Answers